Wall Texture

Product Details:

CEM-SPRAY Spray Texture is a ready-mix powder compound used in the application of interior surfaces. It can be applied to ceilings, walls, wooden furniture, etc. by a hopper gun or spray plastering machine. A wide range of texture patterns can be created using a roller, brush, spray plastering machine or a hopper spray gun.

Areas of Application:

• Concrete Substrates.
• Masonry surfaces.
• Plastered walls.
• Dry wall.
• Cement Boards.
• Interior Surfaces.

Features & Benefits:

• Easy Mixing.
• Spreads easily.
• Non aggregated texture.
• Excellent adhesion over a wide variety of porous surfaces, concrete, and all types of masonry surfaces.
• Developed for different texture patterns.
• Prevents common undesired effects like craters, lumps, pin holes, etc.

Precautions & Limitations:

• For laying tiles on floor, the Surface should be sufficiently hard & in good condition.
• It is recommended for interior application only.
• Always add powder to water & never add water to powder.
• Do not add excess water than recommended.
• For spraying on walls and ceiling, the surface should be sufficiently hard & in good condition.
• It is not considered as a finished surface.
• A sealer coat is required after texturing to avoid differences in sheen on the wall and ceiling surfaces.

Product Details:

CEM-RUFF Ruff Tuff Texture is an acrylic copolymer emulsion-based textured coating mixed with quartz, marble powder and other additives to give a very unique and textured finish. It generally hides the surface defects of plastered surfaces and smooth concrete surfaces.

Areas of Application:

• Cement plastered surfaces
• Lime-cement Plaster
• Bricks
• Masonry
• Wooden Surfaces
• Concrete Surfaces
• Gypsum Boards

Features & Benefits:

• It gives richness to the overall structure.
• It Increases the aesthetic appearance.
• It can be used for giving heritage effects.

Precautions & Limitations:

• Prior to use, follow the product specifications.
• Stir the contents thoroughly before application.
• Over thinning of the mix may result in sagging of the material.
• Ensure that the existing paint is properly bonded and not peeling off.
• Moisture content of the wall should be below 10%.
• PH value of the wall should be neutral.