Cementric India Private Limited

CEM-FIX Tile Fixing Adhesive is a ready to use polymer modified cement-based grey coloured powder suitable especially for floor ling on cementitious substrate & for wall ling on a plastered wall, by replacing the conventional method. 

Areas of Applications: For fixing a variety of tiles (glazed and unglazed ceramic, porcelain, mosaic, vitrified tiles etc.) on horizontal and vertical masonry or tiled surfaces in interiors and exteriors.

Features & Benefits:

• High strength formulation.
• Ultimate flexibility.
• Improved shock and impact resistance.
• Ready to use, only water addition required.
• Better bonding than the usual sand mortar mix.
• High shear strength.
• Reduces wastage and time thus economical.
• Minimizes shrinkage cracks
• Higher coverage area & longer pot life.

Precautions & Limitations:

• For laying tiles on floor, surface should be sufficiently hard & good condition.
• Always add powder to water & never add water to powder.
• Do not add excess water than recommended.
• Never add sand & cement at site.
• Do not use it for heavy stone and tiles.

CEM-PLAST Ready Mix Plaster is a premixed cement-based solution to substitute for the traditional site mix wall plaster process. The solution consists of processed sand which is graded and distributed as per particle size and proportionately mixed cement and water soluble polymers which act as additives. The application method requires mixing of water before application and the mix is ready for plastering.

Areas of Application:

• AAC Block Walls.
• Fly Ash Block Walls.
• Clay Brick Walls.
• Stone Walls.
• Concrete Block Walls.
• Concrete Surfaces.
• Used for both external and internal plastering.

 

Features & Benefits:

• Strength: High Compressive & Tensile strength which increases load bearing capacity.
• Economical: Saves Time & Money as it is premixed and easy to use by just adding water.
• Easy Application: Rapid application via spray machine.
• Minimum Cracks: Shrinkage cracks are minimized as premix plaster raw materials are tested and accurately mixed with specific particle size and quantity.
• Consistency: Due to the manufacturing process and accurate particle size distribution, the premix bags are of consistent quality
• Minimum Wastage: The wastage caused in the conventional site mix process while sand sieving and mixing material is totally
  avoided.
• Higher Coverage: Due to lower density and high volume, it covers 16-20 Sft/bag with a thickness of 10-12mm.
• Finish: Surface finish after application is excellent and equal due to best particle size grading, hence, maximizing wall plaster
  performance.

Health & Safety Precautions:

• This product is non-toxic and non-hazardous.
• Use of gloves, dust-mask and goggles is recommended.
• In case of contact with skin/eyes, wash with plenty of clean water.
• In situation of prolonged irritation, professional medical aid should be sought.

We "Cementric India private limited" are engaged in Manufacturer a high-quality assortment of Concrete Admixture, Concrete Hardener, Bonding Adhesive, Wall Putty. The offered product range is procured from certified vendors of the market.

CEM-BOND Block Joining Mortar is a pre-mixed, self-curing & non-shrink thin jointing mortar for AAC (Autoclaved Aerated Concrete) blocks or equivalent. CEM BOND Block Joining Mortar is a specially engineered jointing mortar with an ideal mix of Ordinary Portland Cement, fine-quality graded aggregates, polymers and chemical additives.

Areas of Application:

• Autoclaved Aerated Light Weight Blocks.
• Fly ash Bricks.

Features & Benefits:

• Thinner jointing material with very high tensile adhesion strength improving the overall masonry strength.
• Better bond than conventional cement based mortar.
• Faster to apply due to good spreadable properties.
• Excellent high strength & water retention properties.
• Economical as quantity of mortar is less than conventional mortar
• Self-curing.
• Negligible Shrinkage
• Highly cost Effective

Health & Safety Precautions:

• This product is non-toxic and non-hazardous.
• Use of gloves, dust-mask and goggles is recommended. In case of contact with skin/eyes, wash with plenty of clean water.
• In situation of prolonged irritation, professional medical aid should be sought.

We "Cementric India private limited" are engaged in Manufacturer a high-quality assortment of Concrete Admixture, Concrete Hardener, Bonding Adhesive, Wall Putty. The offered product range is procured from certified vendors of the market.






CEM-BOND

We "Cementric India private limited" are engaged in Manufacturer a high-quality assortment of Concrete Admixture, Concrete Hardener, Bonding Adhesive, Wall Putty. The offered product range is procured from certified vendors of the market.

We "Cementric India private limited" are engaged in Manufacturer a high-quality assortment of Concrete Admixture, Concrete Hardener, Bonding Adhesive, Wall Putty. The offered product range is procured from certified vendors of the market.

We "Cementric India private limited" are engaged in Manufacturer a high-quality assortment of Concrete Admixture, Concrete Hardener, Bonding Adhesive, Wall Putty. The offered product range is procured from certified vendors of the market.