Cementric India Private Limited

Release Agent Powder is a ready to use powder formulated to be easily applied to the surface of coloured or plain concrete. CEM-REL Colour Release is sprinkled over the surface of freshly placed concrete before imprinting with stamping pads. It forms a barrier that prevents the pads from sticking to the fresh concrete. During this process, a portion of colour release becomes embedded in the surface where it is trapped by the hardening concrete. When the surface is subsequently washed and sealed, an attractive antique surface is achieved.

Areas of Application:

• Lobbies.
• Restaurants.
• Showrooms.
• Play areas.
• Walkways.
• Footpaths.
• Deck areas.

Features & Benefits:

• Easy application.
• Prevents concrete from sticking to the stamping tools. Moisture resistant.
• Streak-free and non-fading.
• The release agents have maximum UV resistance.

Precautions & Limitations

• CEM-REL Colour Release should not be used as the primary colouring agent.
• CEM-REL Colour Release should be used as the secondary colour to give antique effect to the colour hardener.

CEM-GROUT Cement Tile Grout is a polymer modified; cement-based filler used for filling the joints/gaps between the tiles. It effectively fills the gaps and gives water resistant, non-dusting tile joints. It is used for grouting glazed, ceramic, porcelain, vitrified, granito-vitrified tiles & natural stones etc.

Areas of Application:

• Internal & external floor and wall area
• Domestic & commercial applications
• Wider tile joints
• All types of ceramic, glazed, porcelain, vitrified & granito-vitrified tiles.

Features & Benefits:

• Easy to use and clean – just mix with water, ready to use.
• Polymer modified – Crack free, minimum shrinkage and water resistance.
• Suitable for varied tile and stones — All Ceramic, vitrified tiles, granites, etc.
• Available in 27 attractive colours.

Precautions & Limitations:

• Do not use in areas which are exposed to harsh chemicals, stagnant water & extreme conditions.
• Do not use acid to clean joints.
• Do not apply on wet/damp tile joints. Always apply on completely dry tile joints.
• Do not over-mix the material. Over-mixing can reduce the pot life.
• Do not allow grout to harden on the face of the tile. Clean promptly.
• Do not allow water to flow/run into un-grouted joints while application.
• Protect from direct rainfall/ foot traffic for at least 24 hours.