Ready Mix Plaster

Product Details:

CEM-PLAST Ready Mix Plaster is a premixed cement-based solution to substitute for the traditional site mix wall plaster process. The solution consists of processed sand which is graded and distributed as per particle size and proportionately mixed cement and water soluble polymers which act as additives. The application method requires mixing of water before application and the mix is ready for plastering.

Areas of Application:

• AAC Block Walls.
• Fly Ash Block Walls.
• Clay Brick Walls.
• Stone Walls.
• Concrete Block Walls.
• Concrete Surfaces.
• Used for both external and internal plastering.

Features & Benefits:

• Strength: High Compressive & Tensile strength which increases load bearing capacity.
• Economical: Saves Time & Money as it is premixed and easy to use by just adding water.
• Easy Application: Rapid application via spray machine.
• Minimum Cracks: Shrinkage cracks are minimized as premix plaster raw materials are tested and accurately mixed with specific particle size and quantity.
• Consistency: Due to the manufacturing process and accurate particle size distribution, the premix bags are of consistent quality
• Minimum Wastage: The wastage caused in the conventional site mix process while sand sieving and mixing material is totally
  avoided.
• Higher Coverage: Due to lower density and high volume, it covers 16-20 Sft/bag with a thickness of 10-12mm.
• Finish: Surface finish after application is excellent and equal due to best particle size grading, hence, maximizing wall plaster
  performance.

Health & Safety Precautions:

• This product is non-toxic and non-hazardous.
• Use of gloves, dust-mask and goggles is recommended.
• In case of contact with skin/eyes, wash with plenty of clean water.
• In situation of prolonged irritation, professional medical aid should be sought.